problem with lwp-download

Andrew Catero (amc7459@maat.ca.boeing.com)
Fri, 19 Feb 1999 15:21:29 -0800 

I am unable to get lwp-download to work on an sgi o2 running 6.5. Any
help with the problem output. The ftp command works fine.



maat 402# lwp-download
ftp://fantasia.ns.cs.boeing.com/dncms/reports/cisco/ascii/cis_5000_ports_by_bldg.prn
IO::Socket::INET: Cannot assign requested address at
/usr/local/lib/perl5/site_perl/LWP/Protocol/ftp.pm line 151
lwp-download: 500 Can't call method "sockport" without a package or
object reference

This is a internal site which is not accessible to the outside world but
works fine with linux.


maat 403# perl -V
Summary of my perl5 (5.0 patchlevel 4 subversion 4) configuration:
  Platform:
    osname=irix, osvers=6.5, archname=IP32-irix
    uname='irix maat 6.5 11051733 ip32 '
    hint=recommended, useposix=true, d_sigaction=define
    bincompat3=n useperlio=undef d_sfio=undef
  Compiler:
    cc='gcc', optimize='-O3', gccversion=egcs-2.91.60 19981201
(egcs-1.1.1 release)
    cppflags='-D_BSD_TYPES -D_BSD_TIME -DLANGUAGE_C'
    ccflags ='-D_BSD_TYPES -D_BSD_TIME -DLANGUAGE_C'
    stdchar='unsigned char', d_stdstdio=define, usevfork=false
    voidflags=15, castflags=0, d_casti32=define, d_castneg=define
    intsize=4, alignbytes=8, usemymalloc=y, prototype=define
  Linker and Libraries:
    ld='ld', ldflags =' -L/usr/local/lib -L/usr/lib32 -L/lib32'
    libpth=/usr/local/lib /usr/lib32 /lib32 /lib /usr/lib
    libs=-ldb -lm -lc
    libc=/usr/lib32/libc.so, so=so
    useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-n32 -shared -L/usr/local/lib
-L/usr/lib32 -L/lib32'


Characteristics of this binary (from libperl): 
  Built under irix
  Compiled at Feb 19 1999 14:29:00
  @INC:
    /usr/local/lib/perl5/IP32-irix/5.00404
    /usr/local/lib/perl5
    /usr/local/lib/perl5/site_perl/IP32-irix
    /usr/local/lib/perl5/site_perl

maat 404# hinv
CPU: MIPS R5000 Processor Chip Revision: 2.1
FPU: MIPS R5000 Floating Point Coprocessor Revision: 1.0
1 180 MHZ IP32 Processor
Main memory size: 64 Mbytes
Secondary unified instruction/data cache size: 512 Kbytes on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.10
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 1 on SCSI controller 0
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
Video: MVP unit 0 version 1.4
 with no AV Card or Camera.
Vice: TRE